| Customization: | Available |
|---|---|
| Certification: | ISO, CE, Eac |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ENSIGN Wheel Loader YX620
Technical Parameters
| Bucket capacity | m3 | 1.0 | Total cycle time(lift, dump& lower) | s | <9 |
| Rated load | kg | 2000 | Dump height/Dump angle | mm/ ° | 2518/44 |
| Overall operating weight | kg | 6200 | Dump distance/Dump angle | mm/ ° | 946/44 |
| Max. traction force | kN | >56 | Min. ground clearance | mm | 293 |
| Max. breakout force | kN | >58 | Wheel base | mm | 2260 |
| Grade ability | ° | 30 | Wheel tread | mm | 1630 |
| Min. turning radius(outer side of the bucket) | mm | 5143 | Departure angle | ° | 30 |
| Min. turning radius(outer side of the tire) | mm | 4661 | Steering angle(left & right) | ° | 35 |
| Engine | Drive System | ||
| Model | YC4D80-T20 | Torque converter type | single stage, 2 phase, 4 elements |
| Type | vertical, in-line, water cooling, four-stroke, naturally aspirated | Transmission type | Fixed shaft,power shift |
| Rated power | 58kW | Gears | 2 forward,2 reverse |
| Main drive type | spiral bevel gear, first reduction | ||
| Hub reduction type | planetary,first reduction | ||
| Drive axle | dry type axle | ||
| Steering System | Braking System | ||
| Type | load sensing hydraulic | Service brake | Air-over-oil caliper disc |
| Oil pump type | gear pump | Parking brake (emergency brake) |
Flexible shaft control drum brake |
| Working Device Hydraulic System | Tire | ||
| Control type | Pilot control | Specification | 16/17-20-14PR |
| Oil pump type | gear pump | Tread pattern | general pattern |
){kind=link}