| Customization: | Available |
|---|---|
| Cab Location: | Not Adjustable |
| Type: | Electric Forklift |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Intelligent starting system:
The system adopts two-stage starting of electric lock power-on + card swiping to prevent unrelated people from misoperating and causing safety accidents, which complies with the national TSG81 safety regulations.
2. Direct motor drive:
The oil pump adopts direct motor drive to directly convert electrical energy into mechanical energy, improve transmission efficiency, reduce energy loss, and increase energy utilization by more than 10%.
3. Seat power-off + 0PS protection:
The standard seat has good shock absorption performance and more comfortable driving.
The seat has a sensing function, which automatically cuts off the power when leaving the seat to prevent vehicle misoperation and make driving safer.
4. New body:
The power battery is arranged under the chassis, the center of gravity is lowered, the stability is enhanced, and the ride is safer.
The short wheelbase and short rear overhang design have a small turning radius, more flexible operation, and stronger adaptability to working conditions.
5. Maintenance-free steering axle:
Casting integrated steering axle, the main shaft bearing adopts tapered bearing, which has stronger impact resistance and extends the life of the axle;
Buffer blocks are installed at the contact parts with the vehicle body to reduce fatigue and improve comfort
| Model | CPD-HK30 | |
| Power Type | electric | |
| Voltage plateau | V | 80 |
| Operation type | seat |
| Rated load lifting capacity | kg | 3000 |
| Rated load center distance | mm | 500 |
| Front overhang | mm | 475 |
| Wheelbase | mm | 1750 |
| Overweight(with/no battery) | kg | 4250/4050 |
| Axle load full load(front/rear) | kg | 6570/680 |
| Axle load no load(front/rear) | kg | 1880/2370 |
| Tire type | Pneumatic tire | |
| Number of wheels(x=drive wheels) | 2x/2 | |
| Front tire specifications | 28×9-15-14PR | |
| Rear tire specifications | 6.50-10-10PR | |
| Front track width | mm | 1000 |
| Rear track width | mm | 970 |
| Mast tilt angle(front/rear) | ° | 6/12 |
| Mast retracction height | mm | 2070 |
| Free lift height | mm | 130 |
| Max.lift height | mm | 3000 |
| Max.height during operation | mm | 4230 |
| Overall height(overhead guard) | mm | 2145 |
| Length(to the vertical plane of the fork | mm | 2695 |
| Width | mm | 1230 |
| Fork size(H*W*L) | mm | 45×122×1070 |
| Outer distance between forks(min/max) | mm | 250-1085 |
| Mast ground clearance(no load) | mm | 115 |
| Min.ground clearance | mm | 130 |
| Min.turning radius | mm | 2500 | |
| Max.travelling speed(full load/no load) | km/h | 15/16 | |
| Max.lift speed (full/no load) | mm/s | 320/380 | |
| Lowering speed(full load/no load) | mm/s | 450/410 | |
| Max.traction | N | 16500 | |
| Gradeability(full load/no load) | % | 20/20 | |
| Service braking | Hydraulic | |
| Parking brake | mechanical | |
| Rated power of traction motor,S2 60min working system | kW | 10AC |
| Rated power of oil pump motor,S3 15% working system | kW | 16AC |
| Notor type/protection level | ac asynchronous\IP54 | |
| Battery type | lithium iron phosphate battery | |
| Standard battery voltage/capacity | V/Ah | 76.8/202 |
| Standard battery weight | kg | 200 |
| Heating form/protection level of battery | Low temperature heating\IP54 | |
| Battery warranty(whichever comes first) | 5 years or 10000hours | |
| MCU motor controller type | MOSFET/AC | |
| MCU motor controller manufacturer | JIACHEN | |
| MCU motor controller model | ACM80C350 | |
| Hydraulic system working pressure | Mpa | 18.5 |
Ensign heavy Industries, invested and established by ENSIGN Holding Group in 2011, headquartered in Weifang city of Shandong Province, is a large-scale machinery manufacturer. So far, Ensign has established three main business including construction machinery, agricultural equipment, lubricating oil for machinery.
Ensign Heavy Industries has most advanced technological R&D center and fully functional production & manufacture center in the country. Ensign Heavy Industries has passed ISO9001 quality management system certification and self-operation Export and Import Right.
Bearing in mind its corporate spirit of "Strives Constantly for Self-improvement, Commitment to Excellence" and the strategic layout of globalization, Ensign will accelerate the pace of international development and make full efforts to build the leading brand of off-road machinery industry in China and around the world by constantly improving our technology innovation, introducing high-tech talents and improving independent R&D ability.
We have the longest wheel loader workshop in China and comprehensive facilities. The testing ground is also biggest in China. By the advanced processing technology and strict quality control system, we can ensure each product delivered to the customers is with the best quality.
After-sales service/warranty period: 5years after sale, 10000 working hours, whichever comes first
Professional after-sales staff to provide services for you
){kind=link}