YX620 is a loader of which the rated load is 1.8 ton. Short body with flexibility enables it to be adaptable for narrow working site. It is mainly used in municipal engineering, construction site, station, wharf and small size tunnel, etc.
YX620 with advantages as follows:
Compacted Structure and Flexible Operation
- Energy Saving & Green Initiative
- Reasonable match of transmission system with low fuel consumption
- Powerful engine is adopted for energy saving and green initiative.
Efficiency
- High travel speed at each gear
- Small turning radius and flexible operation
- Load sensing system is portable, speedy, accurate and flexible
Comfort & Convenience
- Separated transmission, easy for maintenance
- Reasonably distributed axles with good stability
- Comfortable cab with all-around clear visibility, ample space, good seal and low noise
- A/C is optional for better driving environment
Reliability & Durability
- Branded transmission system with reliable performance
- Upgraded hydraulic system and electric system
- Optimal designed structural components with large bearing capacity
- Thickened wear plate
- Reinforced drive axles are adopted for large bearing capacity and high reliability. Enlarged wheel tread and wheel base improve the overall stability, and adaptability to working conditions.
Technical parameters
| |
|
|
|
|
|
| Bucket capacity |
M³ |
1.0 |
Total cycle time(lift, dump& lower) |
s |
≤ 9 |
| Rated load |
kg |
2000 |
Dump height/Dump angle |
mm/. |
2518/44 |
| Overall operating weight |
kg |
6200 |
Dump distance/Dump angle |
mm/. |
946/44 |
| Max. traction force |
kN |
≥ 56 |
Min. ground clearance |
mm |
293 |
| Max. breakout force |
kN |
≥ 58 |
Wheel base |
mm |
2260 |
| Grade ability |
° |
30 |
Wheel tread |
mm |
1630 |
| Min. turning radius(outer side of the bucket) |
mm |
5143 |
Departure angle |
° |
30 |
| Min. turning radius(outer side of the tire) |
mm |
4661 |
Steering angle(left & right) |
° |
35 |
| Overall dimension (standard configuration) mm |
5827*2150*3019
|
Core components
| Engine |
Drive System |
| model |
YC4D80-T20 |
Torque converter type |
single stage, 3 elements |
| type |
Vertical, in-line, water cooling four-stroke, naturally aspirated |
Transmission type |
fixed shaft, power shift |
| Rated power |
58KW |
Gears |
2 forward, 2 reverse |
| |
|
Main drive type |
spiral bevel gear, first reduction |
| |
|
Hub reduction type |
planetary,first reduction |
| |
|
Drive axle |
dry tpe axle |
| Steering System |
Braking System |
| type |
load sensing hydraulic |
Service brake |
Air-over-oil caliper disc |
| oil pump type |
gear pump |
Parking brake |
flexible shaft internal |
| Working Device Hydraulic System |
Tire |
| Control type |
pilot control |
Specification |
16/70-20-14PR |
| Oil pump type |
gear pump |
Tread pattern |
general pattern |
Optional :
| 1.0 m3 Quick-hitched Bucket |
| Third Section Valve |
| Long Boom |
| Quich Hitch |
| Revolving Light |
More Information:
Website: ensign.en.made-in-china.com;
Audited Supplier 
){kind=link}